真空烧结电炉
Vacuum sintering furnace
ZK-20-10(JZS-16)真空烧结电炉是节能型井式周期作业真空电炉。次要用于航天、航空飞机制造行业、汽车制造行业、石油机械行业、精细机械制造业，金属或非金属资料及零件真空烧结。也可以用于精细机件或锻件光亮无氧化不脱碳热处置和球化退火之用。产品契合中国航空工业部军用规范GJB509-98-88 I类真空烧结电炉。
ZK-20-10 (JZS-16) vacuum sintering furnace is energy-saving cycle operations Well vacuum furnace. 次要用于航天、航空飞机制造行业、汽车制造行业、石油机械行业、精细机械制造业，金属或非金属资料及零件真空烧结。 Mainly used for aerospace， aircraft manufacturing industry， automobile manufacturing industries， petroleum machinery， precision machinery manufacturing， metal or non-metallic materials， and electrical parts thereof vacuum sintering. 也可以用于精细机件或锻件光亮无氧化不脱碳热处置和球化退火之用。 Can also be used for precision mechanical or no oxidation Bright forging heat treatment and not decarbonization spheroidizing use. 产品契合中国航空工业部军用规范GJB509-98-88 I类真空烧结电炉。 China''s aviation product line with the Ministry of Industry military standards GJB509-98-88 Class I vacuum sintering furnace.
次要由钢板卷制成井式炉壳，由型钢组焊制成炉体构造。炉衬采用0.6g/m3超轻质微珠节能耐火砖，炉衬与炉壳间夹置硅酸铝纤维毡，空隙填充收缩保温粉，属于典型节能型炉衬，节电30%-60%。电热元件采用国际外一致规范新型耐超温低温电阻丝0Cr25Al5，真空罐采用1Cr18Ni9Ti不锈钢板卷制，采用维护自动密焊，经我厂大型X光探伤室探伤试压制。炉盖采用不锈钢内保温炉盖，炉盖面板与罐体采用暗双水冷真空橡胶密封，炉面板上装置有抽真空接口、送维护氛围接口、真空压力表。炉盖和炉罐是靠车间行车将整个真空罐吊出自然空冷或水池强迫速冷，以便装卸工件。为进步消费效率，可订购二个真罐交替延续作业。也可随炉自然冷却。该真空烧结电炉采用旋片式机械真空泵加油分散泵延续抽真空或预抽真空充氮气维护，用于真空烧结、光亮退火、回火、淬火等无氧化加热。
ZK-20-10 (JZS-16) vacuum sintering furnace， mainly due to the volume produced well furnace steel shell， made by welding steel furnace structure. 炉衬采用0.6g/m3超轻质微珠节能耐火砖，炉衬与炉壳间夹置硅酸铝纤维毡，空隙填充收缩保温粉，属于典型节能型炉衬，节电30%-60%。 Lining using ultra-light 0.6 g/m3 energy firebrick beads， furnace lining and shell folders between home silicate fiber carpets， swelling gap filler powder insulation， energy-saving typical lining， and energy-saving 30% -60%. 电热元件采用国际外一致规范新型耐超温低温电阻丝0Cr25Al5，真空罐采用1Cr18Ni9Ti不锈钢板卷制，采用维护自动密焊，经我厂大型X光探伤室探伤试压制。 Heating Element adopted new standards at home and abroad over-temperature-resistant high-temperature resistance wire 0 Cr25Al5， vacuum tank using a Cr18Ni9Ti-rolled stainless steel plate， used the protection of automatic welding， I have plants large X-ray detection testing room suppression test. 炉盖采用不锈钢内保温炉盖，炉盖面板与罐体采用暗双水冷真空橡胶密封，炉面板上装置有抽真空接口、送维护氛围接口、真空压力表。 Stainless steel used in the holding furnace lid covered lid panels and dark pair of water tanks used rubber vacuum sealed furnace panels are installed on the vacuum interface， Interface sent to protect the atmosphere， vacuum pressure gauge. 炉盖和炉罐是靠车间行车将整个真空罐吊出自然空冷或水池强迫速冷，以便装卸工件。 Lid on the pot and stove shop vacuum tank lane will be hanging out the entire natural speed forced air cooling or water cooling to the workpiece handling. 为进步消费效率，可订购二个真罐交替延续作业。 To improve the efficiency of production and can be ordered two cans really turn continuum. 也可随炉自然冷却。 With the furnace can also natural cooling. 该真空烧结电炉采用旋片式机械真空泵加油分散泵延续抽真空或预抽真空充氮气维护，用于真空烧结、光亮退火、回火、淬火等无氧化加热。 The vacuum sintering furnace using spin-mechanical vacuum pump for refueling proliferation vacuum or pre-vacuum filling nitrogen protection for the vacuum sintering， bright annealing， tempering， hardening oxidation， and other non-heating.
真空管式电阻炉
Vacuum tube-resistance furnace
真空管式电阻炉(石英加热炉)为节能型周期作业真空电阻炉，主用于冶金行业、工矿企业、大专院校、科研单位作真空加热、真空烧结、纳米资料烧结等各种用处。
#p#分页标题#e#Vacuum tube-resistance furnace (quartz furnace) for the vacuum energy-saving cycle resistance furnace operations， the main for the metallurgical industry， the mining industry and tertiary institutions， and scientific research units for the vacuum heating， vacuum sintering， nano-materials， such as sintered various uses.
真空管式电阻炉外壳由钢板卷制成型，炉膛由高铝质耐火资料烧制成多孔圆柱体，炉衬与炉壳间采用硅酸铝纤维和超轻质保温砖。电阻丝采用高合金电阻丝0Cr25Al5，绕制成螺旋状布置在炉膛周围。炉体下部装置由四个滑轮，可在真空管式电阻炉轨道上作轴向运动。炉膛内安顿有不锈钢真空管，从真空管前端抽真空，后端排气或进氮气。可在真空管式电阻炉体装置由多层铜管绕制的横磁线圈，需通水冷却。
Vacuum tube-resistance furnace shell made from steel-volume， high alumina refractory furnace by burning a porous cylinder， the furnace lining and the shell of a silicate fibers and ultra-light insulating tiles. 电阻丝采用高合金电阻丝0Cr25Al5，绕制成螺旋状布置在炉膛周围。 Alloy resistance wire using high resistance wire 0 Cr25Al5 around the spiral arrangement made in the furnace around. 炉体下部装置由四个滑轮，可在真空管式电阻炉轨道上作轴向运动。 Installing a furnace bottom four pulley， in the vacuum-tube-resistance furnace track for axial movement. 炉膛内安顿有不锈钢真空管，从真空管前端抽真空，后端排气或进氮气。 Placed within a stainless steel chamber vacuum tube from the front of the vacuum tube vacuum， or back-end exhaust into nitrogen. 可在真空管式电阻炉体装置由多层铜管绕制的横磁线圈，需通水冷却。 In the vacuum tube resistor furnace installed by the system of multi-storey brass around the transverse magnetic coil， to water-cooling.
滚筒式电阻炉
Drum resistance furnace
RG2系列滚筒式电阻炉是国度规范节能型周期作业滚筒炉，次要供滚珠、滚柱、薄形钢片等成批小型金属零件热处置用。
RG2 series of roller resistance furnace is the national standard energy-saving cycle roller furnace operations， mainly for the ball， roller， thin sheet metal parts such as small batches using heat treatment.
RG2系列滚筒式电阻炉外壳由钢板和型钢制生长方型炉体。炉衬采用超轻质高强度0.6/cm3微珠节能耐火砖，保温采用全高铝硅酸铝纤维，属于典型超节能构造。电阻丝采用0Cr25Al5高电阻合金丝绕成螺旋状装置在滚筒炉膛的搁丝砖上，搁丝砖采用我厂独家消费的上斜20°防掉丝砖，电阻丝不易从槽中掉出。滚筒炉罐采用1Cr18Ni9Ti不锈钢制成圆柱型，或采用铬锰氮耐热钢铸件，一端由轴承支座在炉体外支承，并采用电动机带加速机停止传用，使炉罐迟缓旋转，工件随滚筒炉罐旋转使之受热平均，并且工件相互之间无复盖景象，热处置后色泽分歧，炉罐另一端为进料口，由二只滚轮支承。进料时，用手摇动电炉倾炉支承架上的变速器手柄，滚筒炉向上倾斜，使进料口向上20°，便于进料，出料时向下摇倾斜40°，即可倒出炉罐内工件。
RG2 series of roller resistance furnace shell from the growth plate and square-steel furnace. 炉衬采用超轻质高强度0.6/cm3微珠节能耐火砖，保温采用全高铝硅酸铝纤维，属于典型超节能构造。 Lining ultra-light high-intensity 0.6 / cm3 beads energy firebrick， holding a full high-alumina silicate fibers， is a typical energy-saving super-structure. 电阻丝采用0Cr25Al5高电阻合金丝绕成螺旋状装置在滚筒炉膛的搁丝砖上，搁丝砖采用我厂独家消费的上斜20°防掉丝砖，电阻丝不易从槽中掉出。 Resistance wire using 0 Cr25Al5 high resistivity alloy wire around a spiral drum installed in the furnace built brick silk， silk dormant brick factory， I used exclusively produced climbing 20 ° brick-swap silk， silk resistance from the slot off a difficult. 滚筒炉罐采用1Cr18Ni9Ti不锈钢制成圆柱型，或采用铬锰氮耐热钢铸件，一端由轴承支座在炉体外支承，并采用电动机带加速机停止传用，使炉罐迟缓旋转，工件随滚筒炉罐旋转使之受热平均，并且工件相互之间无复盖景象，热处置后色泽分歧，炉罐另一端为进料口，由二只滚轮支承。 Using a drum Cr18Ni9Ti furnace tank made of stainless steel cylinder， or a Cr-Mn nitrogen heat-resistant steel castings， by the end of the furnace body， bearing bearing supports， and with a motor-reducer for use furnace tank to the slow rotation， with drum parts Rotation of the tank furnace heated evenly， and the workpiece between each other without coverage phenomenon， the same color after heat treatment furnace can feed the other end to the mouth from two roller bearing. 进料时，用手摇动电炉倾炉支承架上的变速器手柄，滚筒炉向上倾斜，使进料口向上20°，便于进料，出料时向下摇倾斜40°，即可倒出炉罐内工件。 Feeding， shaking hands electric furnace dumping supporting the transmission handle the shelves， roller furnace upward so that I feed upward of 20 ° to facilitate feeding， the material at 40 ° tilt downward shake can be inverted released tank workpiece.
转底式电阻炉
To the end of resistance furnace
#p#分页标题#e#R ZD2-45-4转底式电阻炉是国际目前正盛行的节能型延续式转底炉，用于摩托车铝合金钢体加热后热套等工艺用。(另消费650、750、850、950、1200℃ 各种规格转底式电阻炉，也可按用户要求订做)
RZD2-45-4 to the end of the international resistance furnace is popular energy-saving end to the continuous furnace for steel-aluminum alloy motorcycle heated thermal covers technology used. (另消费650、750、850、950、1200℃ 各种规格转底式电阻炉，也可按用户要求订做) (Another production specifications 650，750，850，950，1200 ℃ to-end resistance furnace， but also can be customized user requirements)
转底式电阻炉构造外壳由钢板和型钢焊接而成，炉体由钢板密焊制成圆型，下部空间装置有转盘支撑，旋转主轴，炉体最下部底板上装置有调速电机和变速器，经过伞型齿轮与主轴衔接，转底式电阻炉的炉村资料采用扇形超轻质高强度0.6g/cm3节能耐火保温砖，保温层采用硅酸铝纤维毡和收缩保温粉，电阻丝线成螺旋状，按均温规律装置在电阻丝槽内，底部也布置电阻丝在公用槽内，这样炉内温度平均，工件及转盘不会与电阻丝相碰，电阻丝运用寿命长，不易损坏。炉盖采用不锈钢板做底板，内置硅酸铝保温，炉门尺寸宽350mm，高580mm，侧墙体中全体向上提升式电动保温炉门，炉门封闭时整个炉门为一个圆形全体，炉门密封功能加强，转盘采用不绣钢制成1600m/m转盘，用以承载工件之用，整个转盘为立体不分工位，操作人员可以恣意堆放工件，由于转盘每40分钟旋传一周，任务时操作人员简直看不到转盘在转动，加上炉门开的较大，操作人员可以恣意进收工件，而不受工夫限转盘可以在20&mdash60分钟旋转一周的工夫恣意调速，不管炉门启闭、转盘从启开工作就不连续的旋转，没有任何必要与炉门启闭停止联锁，需求中止旋转时，只需按下控制电柜上的中止按钮即可，炉门的启闭，由操作人员自行掌握，按动装置在炉门边的启闭钮即可。转底式电阻炉的温度控制局部采用微电脑自动控制温度，控温精度高、操作复杂、由数显显示设定温度值和炉内温度值，并由XWG电子电位差计自动记载工艺曲线，并带有超温报警功用。整个控制零碎运转精度高、节能、无乐音、无超谐和滞后景象、牢靠性极高，为国际上先进的控温零碎。
Resistance to the end of the furnace shell structure of steel plates and welded together， furnace welding of steel plate made by the round， the bottom space installed turntable support， rotating the spindle， furnace installed on the bottom floor with motor and transmission speed through umbrella gear and spindle connected to the resistance furnace at the end of the furnace fan village materials used ultra-high-strength lightweight refractory 0.6 g/cm3 energy-saving thermal insulation tiles， insulation layer silicate insulation mat and swelling of powder into resistance thread spiral， according to the law temperature resistance wire installed in the bed， also at the bottom of resistance wire layout in the tank for this furnace temperature uniformity， and the workpiece will not dial collided with the wire resistance， resistance wire long life， not damage . 炉盖采用不锈钢板做底板，内置硅酸铝保温，炉门尺寸宽350mm，高580mm，侧墙体中全体向上提升式电动保温炉门，炉门封闭时整个炉门为一个圆形全体，炉门密封功能加强，转盘采用不绣钢制成1600m/m转盘，用以承载工件之用，整个转盘为立体不分工位，操作人员可以恣意堆放工件，由于转盘每40分钟旋传一周，任务时操作人员简直看不到转盘在转动，加上炉门开的较大，操作人员可以恣意进收工件，而不受工夫限转盘可以在20&mdash60分钟旋转一周的工夫恣意调速，不管炉门启闭、转盘从启开工作就不连续的旋转，没有任何必要与炉门启闭停止联锁，需求中止旋转时，只需按下控制电柜上的中止按钮即可，炉门的启闭，由操作人员自行掌握，按动装置在炉门边的启闭钮即可。 Lid done with stainless steel plate floor， built-silicate insulation， Furnace Door size 350 mm wide， 580 mm high， the overall lateral wall elevate electric holding furnace door， Furnace Door closure of the Furnace Door as a whole round ， Furnace Door sealing performance enhancements， dial made of stainless steel by 1600 m / m turntable， used to load the workpiece， the entire wheel of the plane is not division， the operator can be stacked workpiece， as dial-rotation every 40 minutes a week ， when the operator can not see dial in almost rotation， and Furnace Door open the larger operators can be arbitrary and out of the workpiece， and without time limits can dial in 20-60 minutes a week to arbitrary rotation speed， regardless of Furnace Door hoist， from the start of work on the dial continuous rotation， and there was no need for chain hoist Furnace Door， the need to stop rotating， just press the control cabinet， stop button， the gate Furnace Door， operators to seize its own， activated installed in the furnace door open and close button. 转底式电阻炉的温度控制局部采用微电脑自动控制温度，控温精度高、操作复杂、由数显显示设定温度值和炉内温度值，并由XWG电子电位差计自动记载工艺曲线，并带有超温报警功用。 Resistance to the end of the furnace temperature controlled by microcomputer control temperature， high precision temperature control， simple operation， set by the Digital display temperature and the temperature of the furnace by XWG potential difference of automatic electronic records technology curve， with a super-temperature alarm function. 整个控制零碎运转精度高、节能、无乐音、无超谐和滞后景象、牢靠性极高，为国际上先进的控温零碎。 The control system operation and high precision， energy saving， no noise， no overshoot and hysteresis phenomenon， high reliability for the international advanced temperature control system.
低温环形转底炉
Ring to the end of hi伴随着互联网和移动生活的日趋成熟，芝麻信用高分和良好的个人征信记录，不仅可以办理贷款、申请信用卡延伸你的财富，更能大大便利我们的生活。gh-temperature furnace
R ZD-105-14低温环形转底炉是新型延续式作业转底炉，用于贵金属、稀有矿、各种矿产品低温烧结之用。
#p#分页标题#e#RZD-105-14 ring to the end of high-temperature furnace is new to the continuous operation at the end of furnace for the precious metals， rare mineral， a variety of minerals with high temperature sintering.
油浴炉
Furnace oil bath
SY-10-3油浴炉，次要供实验室、工矿企业、科研等单位作金属零件油浴回火处置时高温加热用。
SY-10 - 3 oil bath heaters， mainly for laboratory， industrial and mining enterprises， and scientific research units for metal parts oil bath temper when dealing with low-temperature heating.
热风电炉
Hot air furnace
RF-340-2热风电炉次要为各种烘干设备提供波动的热风，热风温度和风速均可调理，并自动控温。
RF-340-2 main furnace hot air drying equipment for the full range of stability spirals， air temperature and wind speed can be controlled and automatic temperature control.
推杆式回火电阻炉
Putter high-temperature furnace back
T-75-5推杆式回火电阻炉是节能型高精度控温高均温延续作业电炉。采用3区3台高速热风循环风机，不锈钢双环气流完全循环风道，使电炉内工件温度平均。次要用于对回火温度平均性要求极高的薄形弹性金属工件以及各种精细机械零件回炽热处置。如对挂衣架薄钢片弹簧夹回炽热处置炉温平均性达±1℃。
T-75-5-putter tempering resistance furnace is energy-saving high-precision temperature control for high-temperature furnace operations. 采用3区3台高速热风循环风机，不锈钢双环气流完全循环风道，使电炉内工件温度平均。 District 3 by 3 high-speed hot air circulation fans， stainless steel double loop cycle of the wind flow completely Road to the workpiece within the furnace temperature uniformity. 次要用于对回火温度平均性要求极高的薄形弹性金属工件以及各种精细机械零件回炽热处置。 Primarily for the tempering temperature uniformity demanding thin elastic metal parts， as well as precision machinery parts heat treatment. 如对挂衣架薄钢片弹簧夹回炽热处置炉温平均性达±1℃。 If the peg racks Danhuangga thin steel heat treatment temperature uniformity of ± 1 ℃.
T-75-5推杆式回火电阻炉，次要由型钢和钢板制成，炉衬采用0.6g/cm3超轻质微珠节能耐火砖，炉衬与炉壳夹层采用硅酸铝纤维保温。属于典型节能炉衬，节电40%。电热元件采用低温电阻丝0Cr25Al5，电炉采用三区加热，三区控温，每区内设有独立的真空风机和不锈钢风道。热风由炉迎风叶经过45°不锈钢风板平均从炉膛两侧循环到炉膛下部，经过悬架式不锈钢滚道下部风道，循环到料盘底部，穿过料盘不锈钢网，平均经过一切工件，循环到料盘上方的回风导板，构成一个完好的热风循环周期，如此重复高速热风循环，使料盘内工件温度平均。温度控制由微电脑高精度顺序自动控温柜分区独立控制三区温度。经过每区的微电脑模糊逻辑运算加PID运算自动高精度无触点8段顺序控制每区的温度，使电炉按用户设定的最优热处置工艺温度顺序曲线运转。计算机依据不同的温度和工夫计算和输入不同的最佳功率，保温时维持功率可自动调整输入，高度浪费了电能。到达在任何设定工艺温度时高精度控平和高精度恒温，克制热惯性、温度超谐和滞后景象，控温精度±1-3℃。可依据装炉量和工艺要求自动和手动从0-100%(0-75KW)调整输入功率大小。可控硅作无触点通断。能自动记载工艺曲线。具有超温报警和自动断电功用。推杆炉门采用气缸。料盘在炉内加热时为9个。整个炉门开闭和料盘进出全部为自动顺序。料盘在炉内周期可在30秒-99分钟内恣意调整。装工件料盘出炉后，可在滑动后架上由下部风机停止风冷降温。
#p#分页标题#e#T-75-5-putter tempering resistance furnace， mainly due to the steel plate and made use of 0.6 g/cm3 lining super energy-saving light beads firebrick， and the furnace shell lining laminated insulation used silicate fibers. 属于典型节能炉衬，节电40%。 Lining is a typical energy-saving， energy-saving 40%. 电热元件采用低温电阻丝0Cr25Al5，电炉采用三区加热，三区控温，每区内设有独立的真空风机和不锈钢风道。 Electric components using high temperature resistance wire 0 Cr25Al5， by three district heating furnace， temperature control three districts， each with a separate area of the vacuum fan and stainless steel duct. 热风由炉迎风叶经过45°不锈钢风板平均从炉膛两侧循环到炉膛下部，经过悬架式不锈钢滚道下部风道，循环到料盘底部，穿过料盘不锈钢网，平均经过一切工件，循环到料盘上方的回风导板，构成一个完好的热风循环周期，如此重复高速热风循环，使料盘内工件温度平均。 Top hot air from the blower fans through 45 ° uniform stainless steel plate from the wind circulation on both sides of the furnace hearth to the bottom， through suspension， stainless steel roller lower wind Road， cycle to feed pan at the bottom， through the feed pan stainless steel wire mesh， even through all the workpiece ， the cycle was expected to wind back to the top of the plate， the hot air to form a complete cycle， the high-speed hot air circulation so repeatedly to feed pan temperature uniformity within the workpiece. 温度控制由微电脑高精度顺序自动控温柜分区独立控制三区温度。 High-precision temperature control by the microcomputer automatic temperature control procedures counters Division III independent temperature control. 经过每区的微电脑模糊逻辑运算加PID运算自动高精度无触点8段顺序控制每区的温度，使电炉按用户设定的最优热处置工艺温度顺序曲线运转。 Through each of the microcomputer fuzzy logic PID computing and high precision non-contact automatic paragraph 8 of each of the controlled temperature， the furnace set by the user optimal temperature heat treatment process procedures curve operation. 计算机依据不同的温度和工夫计算和输入不同的最佳功率，保温时维持功率可自动调整输入，高度浪费了电能。 Computer under different temperatures and different from the calculation of time and the best output power， insulation， can be automatically adjusted to maintain power output with a high degree of conservation of electricity. 到达在任何设定工艺温度时高精度控平和高精度恒温，克制热惯性、温度超谐和滞后景象，控温精度±1-3℃。 Meet any set of high-precision temperature and high-precision temperature control thermostat， thermal inertia to overcome， temperature overshoot and hysteresis， temperature control accuracy of ± 1-3 ℃. 可依据装炉量和工艺要求自动和手动从0-100%(0-75KW)调整输入功率大小。 Can be installed under the furnace and technological requirements of automatic and manual from 0-100% (0-75 KW) adjusting output size. 可控硅作无触点通断。 SCR-off for non-contact. 能自动记载工艺曲线。 Technology curves can be automatically recorded. 具有超温报警和自动断电功用。 Super power and automatic temperature alarm function. 推杆炉门采用气缸。 Putter Furnace Door cylinder used. 料盘在炉内加热时为9个。 Feed pan in the furnace heated to nine. 整个炉门开闭和料盘进出全部为自动顺序。 Furnace Door and the opening and closing all the feed pan out for the automatic procedures. 料盘在炉内周期可在30秒-99分钟内恣意调整。 Feed pan in the furnace cycle in 30 seconds -99 minutes arbitrary adjustments. 装工件料盘出炉后，可在滑动后架上由下部风机停止风冷降温。 Workpiece material was installed， after the release in after sliding from the bottom shelves for air-cooled cooling fan.
高均温悬浮轨道推杆式隧道窑
Putter Suspended orbit high temperature tunnel kiln
#p#分页标题#e#高均温悬浮轨道推杆式隧道窑(PCS纤维预氧化隧道窑)，采用十五台微电脑分十五区高精度顺序控温，不同真空密封风机，各区不同不锈钢风道，经过悬浮轨道和不锈钢网状料盘停止完好的热风循环。空气经过污染，从下至上穿过工件，使炉内工件温度极为平均。次要用于PCS纤维空气热处置。
Putter Suspended orbit high temperature tunnel kiln (PCS fiber pre-oxidation tunnel kiln)， a microcomputer-15 points in 15 high-precision temperature control procedures， different vacuum sealing fan， the wind varies from district to district， stainless steel， and stainless steel track after suspension mesh material for a full set of hot air circulation. 空气经过污染，从下至上穿过工件，使炉内工件温度极为平均。 After purifying the air from the bottom through the workpiece， the furnace temperature is uniform workpiece. 次要用于PCS纤维空气热处置。 PCS fiber mainly for air heat treatment.
企业海
